Articles by Jack Warren 1
07/10/17
Two months ago my transmission started developing serious problems. This is the first opportunity that I have had to write about it. 2nd gear would grind at any speed, and every other gear was perfectly fine. I decided to rebuild my transmission after changing gear oil and doing an alignment didn’t work. All that should be left is a rebuild.
29/07/17
Installed my NRG quick release system last night. If anyone is interested here are the parts I got. NRG short hub part no. SRK-180H, NRG quick release 2.5 Bk part no. SRK-250BK, and a Momo competition wheel COM35BK0B. I used the stock wiring harness, and the clockspring. Had to cut the clips down to fit the harness under the hub. Still functional!
15/07/17
Within the last 3 weeks, my second gear (synchro?) has started grinding every time I shift. It doesn’t do it when cold, only once warmed up. I changed the gear oil, and did a shifter alignment, but no change. Has anybody had this issue? I don’t know if thr synchro is too far gone, or if it could be a clutch issue, or if it could even be worn motor/transmission mount.