6 Quirky Engines You Probably Didn't Realise Existed
Toyota 1GZ-FE
Believe it or not, there is such a thing as a Toyota V12. It’s called the 1GZ-FE, and it’s only ever powered one production car: the Japan-only Toyota Century a car beloved by government figures and the Yakuza alike.
This under-stressed 5.0-litre, 48-valve lump puts out a modest 305bhp and 355lb ft, although a heavily modified twin-turbo example developing 1000bhp appeared in the famous Top Secret Supra.
Cizeta-Moroder V16T
If there were a prize for the weirdest supercar engine ever made, the Cizeta-Moroder V16T would probably win it. This extremely low-volume supercar of the 1990s used two Lamborghini Uracco V8s sharing a single block to create a ‘V16’ with eight camshafts, which was then mounted transversely.
If that sounds bonkers, that’s because it is. Thoroughly bonkers. Then again, that’s to be expected for a vehicle with such peculiar origins - the car was a joint venture between engineer Claudio Zampolli and Giorgio Moroder. Yep, the Italian electronic music bloke.
This unconventional engine powered the rear wheels via a five-speed manual, and gave a top speed of 204mph.
Motori Moderni Subaru flat-12
A flat-12 configuration is something very rare indeed, and was most notably used for the Ferrari Testarossa and Porsche 917. However, one flat-12 most don’t know about was actually badged as a Subaru engine.
The 3.5-litre was built by Motori Moderni for the 1990 Subaru Coloni F1 car, and it looks rather spectacular. Unfortunately, its on track performance was anything but - apparently producing ‘just’ 500bhp or so it was way down on power compared to the rest of the field, and the car it was fitted to didn’t qualify for a race even once.
It would have been the slowest car of the year, had it not been for the even more disastrous Life F1 machine. Speaking of which…
Life W12
You know VW Group’s W12, which is really just a V12 with slightly angled and staggered pistons on two cylinder banks? This is nothing like that. Nothing at all.
The Life W12 instead uses three cylinder banks housing four pistons apiece. And while innovative, it was a complete turd. It produced around 400bhp (some say less), and like the Coloni Subaru, failed to qualify for a single race.
The Life car was closer to the performance of Formula 3 cars of the time, and was often 20 seconds off the pace.
The low point that sums up Life’s sorry time in F1 came on one race weekend when the car ground to a halt a few hundred metres from the pits, because the mechanics had gone on strike and refused to put any oil in the car. And you thought Hispania Racing was bad…
Chevrolet Corvair flat-10
V10 engines are rare in production cars, but how about flat 10s? We’ve only been able to find one, produced by Chevrolet.
It was an experimental engine based on the Corvair’s flat-six, put to use in a Impala while Chevrolet mulled over the prospect of expanding the Corvair brand. It never made it past the prototype stage, which is why it’s so unheard of today.
Mazda 20B
Rotary engines are already an obscure thing in the motoring industry, but as far as three rotor units go, just one found its way to a production car: the Mazda 20B.
It was used only in the ‘JC’ series Eunos Cosmo, and thanks to the addition of a sequential turbocharger setup, the 2.0-litre unit produces 300bhp.
Any weird engines you think deserve a mention? Let us know in the comments!
Comments
Bugatti actually made a W18 engine, but the same theory as the “Life W12” above, 3 banks of 6 cylinders each, 3 cylinder-heads and yep…. 18 pistons. As a matter of fact, you can see it in the Autostadt Museum in Wolfsburg/Germany. For those who find it difficult to believe, here’s a photo. :)
Wasn’t that thing installed in a Veyron-Prototype?
Because there was one whose name ended with “18.3”, meaning 18 cylinders and three turbochargers.
VWs w16, delta diesels, nsa rotary, the baby British v8s like the riley 1.8lt and sunbeam 2.4lt v8s, Detroit diesels 2 stroke diesels
You said 20B ? :
This one is N.A., developped by WGT Auto Developments and outputs 515hp.
http://www.dailymotion.com/video/x4zjke_passage-au-banc-rx-8-20b-tber_auto
http://www.dailymotion.com/video/x5scjh_spa-10-06-2008_auto
The car is a silhouette made in tubular steel only recovered by a polyester bodywork. It was not that fast due to the tyre regulations of its championship but could easily mark the 2:30 range at Spa-Francorchamps.
It never won any races and only raced for 1 year in Belgium but still, this car was a DRAGON !
Bing.
That is a weird engine.
What about the oval cylinder/piston Honda engine? Sortv like 2 pistons joined together with 2 con rods per piston. But they sucked cus the piston rings were a pain in the ass due to their shape.
Adams-Farwell 5 cylinder with a stationary crankshaft
What about the H16? 2 flat 8’s one on top of the other. Did it have 2 cranks?
Sooooooo, will that H12 fit in my Legacy?
What about the BRM H-16 that was mad for the lotus f1
https://youtu.be/0CmGJucRDBk