V6 Vs Straight-Six: The Pros And Cons Of Each Engine
Six-cylinder engines have long been the heartbeat of some of the world’s most iconic and legendary vehicles. The straight-six engine configuration (also known as an inline-six) has powered icons such as the Jaguar E-Type, Toyota Supra, Nissan Skyline GT-R and BMW M3. Meanwhile, V6 engines have served as the powerplant for heroes including the Honda NSX, Nissan GT-R R35 and Lancia Stratos. Both six-cylinder configurations have left an indelible mark on the automotive landscape.
A few years ago, the straight-six seemed to be fading away, but the configuration has had something of a resurgence, with many manufacturers replacing V6s with them.
So, what is it these car brands have to weigh up when deciding how to arrange their six-cylinder engines, assuming they haven’t done something weird like laying them flat? (We’re looking at you, Porsche).
Here are the pros and cons of each.
Straight-six advantages
Straight-six engines are so named because the cylinders are arranged in a straight line, and make for a clean and straightforward design. The inline configuration eliminates the need for separate heads or valve trains, which are needed with a V-configuration’s cylinder offset. A dual overhead cam inline-six can operate with just two long camshafts to control its valves, while a V6 requires twice as many smaller camshafts. This results in fewer moving parts and, in theory at least, fewer potential issues.
This simplicity makes straight-six engines more accessible for maintenance work, allowing greater access to spark plugs, leads and ancillaries and making the I6 often a better choice for amateur mechanics. However, the most significant advantage lies in engine balancing. The normal firing order of a straight-six ensures that the reciprocating forces balance each other out, resulting in a smooth-revving engine – a trait exemplified by units like the BMW S50 and Nissan RB26.
A lot of modern straight sixes are also modular, developed as part of engine families incorporating inline threes, fours and, of course, sixes. This makes for potentially lower engine costs.
Straight-six disadvantages
Despite its advantages, the straight-six faces several challenges. Packaging has always been an issue, as the extra two cylinders compared to an inline-four engine make it significantly longer. This poses challenges when mounting an I6 in a transverse configuration, especially in a front-wheel drive configuration, where there is often insufficient space for the necessary transmission and drivetrain components. With manufacturers looking to create powertrains that can be shared across as many chassis as possible, the elongated I6 just isn’t quite versatile enough.
The long engine and its components also lack rigidity compared to more compact engine setups. Longer camshafts and crankshafts naturally flex slightly during rotation, and the engine block lacks the stiffness of a V6 equivalent. These factors negatively affect the car’s centre of gravity, with rotating and static mass sitting slightly higher in the engine bay than other more compact engine options.
V6 advantages
The V6 engine configuration means the cylinders are tilted away from each other at an angle, typically in 60 or 90-degree configurations, although there are some curious exceptions like McLaren’s 120-degree V6 and Honda’s 75-degree second-gen NSX V6.
V6s are still prevalent in numerous performance cars thanks to their versatility across a variety of platforms. Turbocharging is highly effective in a V6 to create upwards of 500bhp, and manufacturers frequently offer twin-turbo V6 setups as an alternative to bulkier V8 engines. The Nissan GT-R R35 swapped the straight-six RB26 used in its Skyline predecessors for a 3.8-litre twin-turbo V6, capable of delivering 592bhp in the GTR-Nismo and more than 1000bhp in the hands of tuners.
The compact nature of V6 engines allows them to be easily integrated into a variety of engine bays within a manufacturer’s lineup. This flexibility also enables front-wheel-drive setups to use V6 powertrains, which can lead to some truly epic performance bargains like the MG ZS180 with its Rover KV6 and the Mazda MX-6, which squeezed in a 2.5-litre V6 in its second generation.
V6 disadvantages
Despite having the same number of cylinders as the inline-six, the V6 engine lacks the same inherent balance. Effectively, it consists of two inline threes joined together, requiring balancing shafts with specially placed weights to counteract unwanted inertia. Without these, vibrations would travel through the crankshaft and disrupt the engine’s efficiency.
As displacement increases, along with bore size, more counterweights are needed, further complicating the engine’s design and driving up manufacturing costs. A DOHC V6 requires four camshafts and potentially 24 valves in total, increasing the complexity of the valvetrain components. This can be intimidating for less-experienced enthusiasts working on V6 engines.
While many petrolheads lament the decline of truly exciting straight-six engines, a few recent developments offer some hope. Stellantis introduced a new twin-turbocharged inline-six, called the Hurricane, JLR has returned to using the engine type, and there’s also a straight-six - in petrol and diesel forms - in various new Mazda models including the CX-60.
For the most part, though, the V6 continues to dominate, and given the calibre of performance vehicles powered by this configuration, it's difficult to argue with the performance they offer despite their drawbacks.
Comments
A girdle usually fixes the engine block rigidity issue, but it’s usually only needed in turbo models running extreme boost (in the case of the Barra anyway)
Definitely inline 6. Specifically nissan rb. Well engineered. Cant see any stupid design decisions. Practically bulletproof and parts are easy to get.
I want to see inline 6 return
Especially RB26
I say straight six but I might be a little biased…
I6 for life
354 perkins. cummins anything. I6 engines produce more torque than v8s with more displacement. we had a 354 perkins, made probably 500 ft-lbs of torque, and our 7.3 idi t444e turbo ford pre powerstroke makes 400 ft-lbs, with worse fuel mileage with a smaller truck.
Big fan of the inline 6’s , having owned many of them(skyline , falcon and BMW’s) and it is great to see merc and jag are going back to them…
Cool article, but I think the 60° and 30° V6s are the more common variety, the 90° V8, like the 3.8l GM V6 used in the 1990s and 200s were more rare due to the difficulty of engineering them in that configuration (can’t remember the specifics other than it had something to do with the crankshaft I believe.)
‘08 128i 3.0L I6, ‘99 M3 3.2L I6, ‘95 Wrangler 4.0L I6… So I’m a bit biased, but, Inline 6 is the winner.
I have a bmw z4 with a straight six. I want to putt a root supercharger in it. Is that posible?