Saxo Bolt Size Database

Saxo VTS - TU5J4 - 1.6 16v Parts

Coil pack & Cover
Coil Pack - M5x0.80 - 25mm long - x5 (x5 M5 washers needed)
Coil pack Cover (J4) - M6x1.00 - 20mm long - x6 (washers optional)
Coil pack Cover (JP4) - M4x0.50 - 20mm long - x6 (washers optional)

Cam Covers
Camshaft covers (J4) - M6x1.00 - 20mm long - x16 (x16 M6 washers needed)
Camshaft covers (JP4) - M6x1.00 - 23mm long - x16 (x16 M6 washers needed) http://www.saxperience.com/forum/sho...d.php?t=291504
Camshaft Ladder Bolts - M6x1.00 - 36mm long - x24 (x24 washers needed)

Inlet Manifold
Top 3 Bolts - M6x1.00 - 90mm long - x3 (x3 M6 washers needed)
Back 2 Bolts - M6x1.00 - 35mm Long - x2 (x2 M6 washers needed)
Fuel Rail Bolts - M6x1.00 - 16mm long - x2 (x2 washers needed)
Bolts Inlet-Head - M6.100 - 30mm Long - x6 (x5 M6 washers needed)
Nuts Inlet-Head - M6x1.00 - x3 (x3 M6 washers needed)

Throttle Body
TB-Inlet Bolts - M6x1.00 - 35mm long - x3 (x3 M6 washers needed)

Thermostat Housing
Housing-Head Bolts - M6x1.00 - 50mm long - x4 (x4 M6 washers needed)
Hose-Housing Bolts - M6x1.00 - 20mm long - x3 (x3 M6 washers needed)
Temperature Sensor Plugs - M14x1.25
Bleed Nipple Bolt - M6x1.00 - 18mm long - x1 (x1 washer needed - has a small hole in it for bleeding)

Cambelt Cover
Inner Cover Bolts - M6x1.00 - 16m long - x2 (x2 M6 washers needed)
Outer Cover Bolts - M5x0.80 - 30mm long - x4 (x4 M5 washers needed)
Lower Cover Bolts - M6x1.00 - 12mm long - x4 (Citroen list x6) (M6 washers needed accordingly)

Exhaust Manifold Studs
Manifold Stud - M8x1.25 - Inner thread 15mm, Blank 6mm, Outer thread 32mm - x10
Manifold Nut - M8x1.25 - x10 (No washer needed)

Exhaust Manifold Cover/Heat Shield
Manifold Heat Shield Bolts - M6x1.00 - 12mm long - x5 (x5 M6 washers needed)

Upper Mounts
Engine Mount-Chassis Bolts - M8x1.25 - 25mm long - x2 (x2 M8 washers needed)
Hydraulic Mount to Engine Mount - M8x1.25 - 50mm long - x1 (x1 M8 washer needed)
Gearbox-Mount Nuts (for the studs) - M8x1.25 - x3 (x3 M8 washers needed)
Gearbox Mount-Chassis Bolts - M8x1.25 - 20mm long - x2 (x2 M8 washers needed)
Gearbox Mount-Chassis Nut - M12x1.75 - x1 (x1 M12 washer needed)

Clutch & Flywheel
Clutch cover bolts - M7x1.00 - 30mm long - x6 (x6 M7 washers needed)
Flywheel-Crankshaft Bolts - M10x1.5 - 20mm long - x6
Starter motor bolts - M8x1.25 - 60mm long - x3 (x3 M8 washers needed)

Intermediate Bearing Carrier
Intermediate bearing carrier-engine bolts Pt.1 - M10x1.50 - 70mm long - x1
Intermediate bearing carrier-engine bolts Pt.2 - M10x1.50 - 35mm long - x2 (x2 M10 washers needed)

Battery Tray
Battery Tray nuts - M6x1.00 - x3 (x3 M6 washers or flanged nut needed)
Battery Clamp Bolt - M6x1.00 - 25mm long - x1 (x1 M6 washer needed)

Strut Nuts
Top Mount nuts - M8x1.25 - x6 (x6 M8 washers needed)

Wing Bolts
Top Wing Bolts - M6x1.00 - 20mm long - x6 (x6 M6 washers needed)

Headlight Bolts
Mk1 & Mk2 Headlight Bolts - M6.100 - 20mm long - x4 (x4 M6 washers needed)

Slam Panel Bolts
Air filter housing-Slam panel Nuts - M6x1.00 - x3 (x3 M6 washers needed)
Air Filter hose Bolt - M6x1.00 - 20mm long - x1 (x1 M6 washer needed)

Sump
Sump Bolts - M6x1.00 - 18mm long - x16 (x16 M6 washers needed or flanged bolt head)
Sump Plug - M16x1.50
Oil Temp Sensor - M14x1.25

Oil Pressure
Oil Pressure Sensor - M16x1.50

Oil Filter
Oil Filter Thread - M20x1.5 - 37mm long

Radiator Fan
Radiator Fan nuts - M6 - x3 (No washers needed)

Front Suspension bolts
Wishbone Ball Joint Bolt - M10x1.50 - 58mm long - x2 (half of shaft is non-threaded)
Wishbone Ball Joint Nut (to fit above) - M10x1.50 - x2 (Nyloc)
Track-rod end nuts - M10x1.25 - x2

Front Hub nut - M20x1.50 - 16 or 28mm thick depending on the shaft - x2
Droplink nuts - M12x1.75 - x4 (x2 M12 washer, only on the top nut of droplink)
Front Arb bush clamp bolts - M10x1.50 - 32mm long - x2
Front Wishbone bush bolt - M12x1.25 - 83mm long - x2 (at least half of it is non-threaded) (x2 M8 washer - placed behind the head of bolt)
Front Wishbone bush nut (To fit above) - M12x1.25 - x2 (x2 M8 washer)

Rear Suspension Bolts
Torsion Bar bolts - M8x1.25 - 14mm long - x4
Rear Arb Arm bolts - M8x1.25 - 25mm long - x2

Top Damper Bolt - M12x1.75 - 90mm long - x2
Top Damper Nut - M12x1.75 - x2

Bottom Damper Bolt - M14x2.00 - 102mm long - x2
Bottom Damper Nut - M14x2.00 - x2 (x2 M14 washers needed)

Front Brake
Caliper Bolts - M12x1.50 -35mm long - x4
Brake disc retaining bolt - M6x1.00 - 14mm Long - x4 (Countersunk head to sit flush with the brake disc)


Mk2 VTR Parts - TU5JP - 1.6 8v

Rocker Cover
Rocker cover stud - Citroen 0250 60 - £0.29 + VAT each - x2 needed
Rocker cover cap nut - Citroen 0250 62 - £1.05 + VAT each - x2 needed

Thermostat Housing
Hose-Housing Bolts - M6x1.00 - 20mm long - x3 (x3 M6 washers needed)
Temperature Sensor Plugs - M14x1.25
Bleed Nipple Bolt - M6x1.00 - 18mm long - x1 (x1 washer needed - has a small hole in it for bleeding)

Exhaust Manifold Studs
Manifold Stud - M8x1.25 - Inner thread 15mm, Blank 6mm, Outer thread 32mm - x10
Manifold Nut - M8x1.25 - x10 (No washer needed)

Exhaust Manifold Cover/Heat Shield
Manifold Heat Shield Bolts - M6x1.00 - 11mm long - x3 (x3 M6 washers needed)

Upper Mounts
Engine Mount-Chassis Bolts - M8x1.25 - 25mm long - x2 (x2 M8 washers needed)
Hydraulic Mount to Engine Mount - M8x1.25 - 50mm long - x1 (x1 M8 washer needed)
Gearbox-Mount Nuts (for the studs) - M8x1.25 - x3 (x3 M8 washers needed)
Gearbox Mount-Chassis Bolts - M8x1.25 - 20mm long - x2 (x2 M8 washers needed)
Gearbox Mount-Chassis Nut - M12x1.75 - x1 (x1 M12 washer needed)

Clutch & Flywheel
Clutch cover bolts - M7x1.00 - 30mm long - x6 (x6 M7 washers needed)
Flywheel-Crankshaft Bolts - M10x1.5 - 20mm long - x6
Starter motor bolts - M8x1.25 - 60mm long - x3 (x3 M8 washers needed)

Intermediate Bearing Carrier
Intermediate bearing carrier-engine bolts Pt.1 - M10x1.50 - 70mm long - x1
Intermediate bearing carrier-engine bolts Pt.2 - M10x1.50 - 35mm long - x2 (x2 M10 washers needed)

Battery Tray
Battery Tray nuts - M6x1.00 - x3 (x3 M6 washers or flanged nut needed)
Battery Clamp Bolt - M6x1.00 - 25mm long - x1 (x1 M6 washer needed)

Strut Nuts
Top Mount nuts - M8x1.25 - x6 (x6 M8 washers needed)

Wing Bolts
Top Wing Bolts - M6x1.00 - 20mm long - x6 (x6 M6 washers needed)

Headlight Bolts
Mk1 & Mk2 Headlight Bolts - M6.100 - 20mm long - x4 (x4 M6 washers needed)

Slam Panel Bolts
Air filter housing-Slam panel Nuts - M6x1.00 - x3 (x3 M6 washers needed)
Air Filter hose Bolt - M6x1.00 - 20mm long - x1 (x1 M6 washer needed)

Sump
Sump Bolts - M6x1.00 - 18mm long - x16 (x16 M6 washers needed or flanged bolt head)
Sump Plug - M16x1.50

Radiator Fan
Radiator Fan nuts - M6 - x3 (No washers needed)

Front Suspension bolts
Wishbone Ball Joint Bolt - M10x1.50 - 58mm long - x2 (half of shaft is non-threaded)
Wishbone Ball Joint Nut (to fit above) - M10x1.50 - x2 (Nyloc)
Track-rod end nuts - M10x1.25 - x2

Front Hub nut - M20x1.50 - 16 or 28mm thick depending on the shaft - x2
Droplink nuts - M12x1.75 - x4 (x2 M12 washer, only on the top nut of droplink)
Front Arb bush clamp bolts - M10x1.50 - 32mm long - x2
Front Wishbone bush bolt - M12x1.25 - 83mm long - x2 (at least half of it is non-threaded) (x2 M8 washer - placed behind the head of bolt)
Front Wishbone bush nut (To fit above) - M12x1.25 - x2 (x2 M8 washer)

Rear Suspension Bolts
Torsion Bar bolts - M8x1.25 - 14mm long - x4
Rear Arb Arm bolts - M8x1.25 - 25mm long - x2

Top Damper Bolt - M12x1.75 - 90mm long - x2
Top Damper Nut - M12x1.75 - x2

Bottom Damper Bolt - M14x2.00 - 102mm long - x2
Bottom Damper Nut - M14x2.00 - x2 (x2 M14 washers needed)

Front Brake
Caliper Bolts - M12x1.50 -35mm long - x4
Brake disc retaining bolt - M6x1.00 - 14mm Long - x4 (Countersunk head to sit flush with the brake disc)

Source

Sponsored Posts

Comments

No comments found.